EverFocus Flex1.0 User Manual download pdf (Page 50)

To select a period of time, point the mouse to the desired start time, press and

hold the mouse button, drag to the desired end time, and then release the

mouse button.

The default access permission for each time zone bar is “both allowed”, which

indicates the selected access group can both enter and exit from the checked

doors in the door list.

6. “Copy” and “Paste” Buttons: These buttons provide a simple way to duplicate

time zone configurations for different date types.

“Close” Button: This button closes the Access Group Settings screen and

returns the user to the main menu.

“Apply to days” button: This button provides a simple way to duplicate time

zone configurations for different dates and date types.

7. Access Permissions Buttons: There are 4 different permissions for doors:

a. Green for “Entry/Exit”

b. Yellow for “No Entry/Exit Only”

c. Blue for “Entry Only/No Exit”

d. Red for and “No Entry/No Exit”

Configure an Access Group

In this section we will introduce how to set up an access group by selecting the doors,

setting the date type and time zones, and setting the access permission. Finally we will

give a detailed hypothetical example to illustrate how to set up access authority.

Select a Controller

Select the controller to be configured from the controller list shown in Fig. 6.1. Note

that only the currently online controllers are shown in the controller list.

Select an Access group

Choose the group is about to be set from the access group list shown in Fig. 6.1. The

combo box contains the group index from 1 to 64.

Set Access to Doors

Check the doors that the group chosen above is allowed to access. Uncheck the doors

that the group chosen above is prohibited to access.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 122 123

No comments

EverFocus Flex1.0 User Manual Page 50