EverFocus Flex1.0 User Manual download pdf (Page 26)

Click “OK” to continue to delete this controller. Otherwise, click “Cancel” to keep the

controller.

Update the Status of Controllers

There are two methods of reconnecting to controllers on the network. To search for a

specific controller, click “Search” in the function bar. To search the network for

all controllers, click “Search all” to refresh the status of all the controllers listed in

the controller list.

After the button is clicked, the software will try to connect to controllers in the list and

refresh the controller status The connection and the settings of the specified controller

will be shown after the search is completed.

Configure a Controller

All the configurations for a controller can be managed in the controller setting area. The

details of how to configure a controller are introduced below.

Specify the Location of a Controller

Users can change the location description of a controller. To name a controller location,

follow the steps as below:

1. Select a controller in the controller list

2. Click the “Modify” button at the top right corner of the controller setting area.

Please note that while in the modification mode, users cannot add or delete a

controller, or update controllers’ status.

3. Change the location of the controller in the text box as shown in the following

figure:

Fig 4.6 Set the controller location

4. Click “OK” to confirm the change.

Change the Serial Port for a Controller

Similar to the process of editing the controller location description, click the “Modify”

button to change the COM port for a controller:

1. Select a controller from the controller list.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 122 123

No comments

EverFocus Flex1.0 User Manual Page 26