EverFocus EDSR400H Instruction Manual download pdf (Page 50)

EVERFOCUS ELECTRONICS CORPORATION

Chapter

Playback Overview

Before continuing please be sure to have reviewed DVR Menu Setup (Chapter 3). You

re now ready to begin setting up the machine for playback. This chapter will show you

asic Playback

¾ Assuming you have completed the setup options in Chapter 1 through 4. If

you are in Record mode hit the stop button to stop recording.

¾ If the menu pops up when you press the stop button. This usually means you

have either the DVR is in Timer record or Motion record. Log into the DVR

menu by pressing the Menu button. Go to Either Timer Setting Menu or

Motion Record Setting menu and turn them off and exit menu by pressing

menu to stop recording.

¾ Once you have stopped any type of recording on the DVR you are ready to do

playback.

¾ Pressing the play button will set the recorder into playback mode and play the

last segment recorded.

¾ If you Press the Rev play button it will play the last known segment in reverse

mode.

¾ At any point if you wish to fast forward or rewind while playing back simply

use the shuttle dial to do so. The speed will be shown on the corner of the

screen. << Or >> 2, 4, 6, 8, 16, 32, 600X.

¾ If you want to do a slow playback press the pause button anytime during

playback. Then simply turn the shuttle clockwise or counter clockwise

depending if you want to do a slow forward or slow rewind. The speed will be

shown on the corner of the screen. << Or >> 1/2, 1/4, 1/6, 1/8, 1/16, 1/32.

¾ If you want to go frame by frame while playing something back. Press the

pause button and use the jog dial to advance to the next image. Turning the jog

dial counter clockwise will go to the previous still image.

how to setup the recorder for basic playback.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 108 109

No comments

EverFocus EDSR400H Instruction Manual Page 50