EverFocus EDSR400H Instruction Manual download pdf (Page 13)

EVERFOCUS ELECTRONICS CORPORATION

Basic Wiring Instructions

Please refer to diagram 1 on page 9 to assist you with this portion of the ins

nect the power source or adapter into the power sock

ower source as the cameras.

¾ Cameras: Connect each cameras video output to the video input (Top row

the system

¾ Audio Input: Connect the according audio device refereed on chapter 7.

¾ Speaker: Connect the according audio device refereed on chapter 7.

¾ Ethernet: The digital video recorder may be viewed from a PC via the LAN

connector using a RJ45 Ethernet cable.

¾ RS232/RS485: The digital video recorder may be controlled from a PC via

RS232/RS485.

 Please note: This can be done using a serial cable.

¾ Main Monitor: Connect the main monitor output connector to a main

monitor. The main monitor displays selected live or recorded cameras in any

available format.

 Please note: The main monitor must be connected in order to make

configuration changes, enter the main menu, or do a playback at the

machine.

¾ Call Monitor: Connect the call monitor output connector to a call monitor.

The call monitor displays selected live cameras in full screen format.

 Please note: The call monitor will only display one full screen camera

at a time.

tallation.

et shown in ¾ Power: Con

diagram 1.

 Please note: Do not plug the digital video recorder into the sa

connections) on the digital video recorder shown in diagram 1.

 Please note: At least one camera must be connected before

is running for the auto detection of video standard to take effect.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 108 109

No comments

EverFocus EDSR400H Instruction Manual Page 13