EverFocus EDSR400H Instruction Manual download pdf (Page 36)

EVERFOCUS ELECTRONICS CORPORATION

RS23

2/RS485 Setting Menu

Diagram 12

iagram twelve is a screen shot of the RS232/RS485 Setting Menu. This menu is for

tting up a connection from the digital recorder to a computer to transfer instructions

r information using the HyperTerminal program in Windows. In the RS232/RS485

etting Menu the following fields are defined as follows:

S232:

¾ RS232 Baud Rate: This field is to set the speed at which is used to transmit

instruction or information through the RS232 port on the DVR. There are

six different speeds, 1200 BPS, 2400 BPS, 4800 BPS, 9600 BPS, 19200

BPS, and 3840 BPS. The default setting from the factory is 9600 BPS. To

change this, simply use the arrow keys on the DVR which also represent

the CH1, CH2, CH3 and CH4 keys (These are the top four left buttons).

Use the up and down arrow keys to make your selection.

¾ RS232 Stop Bit: This fi

There are two different DVR is set to

1. To change this, simply use the arrow keys on the DVR which also

represent the CH1, CH

buttons). Use the up an your selection.

eld is to set the stop bit for the RS232 connection.

stop bits, 1 or 2. The default in the

2, CH3 and CH4 keys (These are the top four left

d down arrow keys to make

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 108 109

No comments

EverFocus EDSR400H Instruction Manual Page 36