EverFocus eDR400 Instruction Manual download pdf (Page 52)

EVERFOCUS ELECTRONICS CORPORATION

 Please Note: When the Hard Drive is full, the DVR will either stop

recording automatically or overwrite from the beginning of the hard drive.

This is all dependent on what was set in the record setting (see page 24).

Motion Recording Setup

¾ Assuming you have completed the setup options in Chapter 1 and 2. Log into

the DVR menu by pressing the Menu button. This method is highly

suggested for Motion Recording.

Turning the jog dial clockwise or counter clockwise will allow

you to scroll through the different menu setup option pages.

¾ Once You Reach the Record Setting Menu (See Page 24) change the

Permanent Record option to the on position.

¾ Use the jog dial after completing the previous step and go to Motion Record

Setting menu (See Page 21). Change the Alarm Recording speed and quality

that best fits your application.

 Please Note: See Appendix B to find the appropriate speed to fit your

recording needs.

¾ Exit the menu by pressing the Menu button.

 Please Note: Our recorders are developed for segment recording. One

segment or motion event can record to one sector on the hard drive.

Hard drives contain on average 256 sectors. Therefore recording on

motion only you will see the Record Light going on and off you are

not recording properly in motion. This will eat up your hard drive

space. To remedy this problem simply turn permanent recording to

the on position to stay in record mode continuously.

¾ To view the operating display (diagram 19), press the Display button.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 111 112

No comments

EverFocus eDR400 Instruction Manual Page 52