EverFocus eDR400 Instruction Manual download pdf (Page 35)

EVERFOCUS ELECTRONICS CORPORATION

Network Setting Menu

Diagram 13

Diagram thirteen is a screen shot of the Network Setting Menu. This menu is for

setting up the configuration for networking to the DVR. Please refer to the

Networking Chapter of this manual to fully understand how to setup your network for

this DVR. In the Network Setting Menu the following fields are defined as follows:

¾ IP Address: This field is to set a static IP Address for the DVR. A static IP

address is an IP address whose value does not change. Everfocus suggest

using a static IP address. If your Internet provider does not offer a static IP

address you have the option to use a dynamic IP address. For Example: A

Test IP address given to the machine by our engineers is 192.168.010.010.

 Please Note: The Addresses in the machine are for our own testing

you must apply your own addresses to comply with your network.

Refer to Networking Chapter for more details.

To change this, simply use the Jog Dial on the DVR. Press the Enter key

to make your selection.

¾ Net mask: This field is to set the subnet mask for your network so as the

DVR will be recognized within the network. Example: 255.255.255.000.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 111 112

No comments

EverFocus eDR400 Instruction Manual Page 35