EverFocus eDR400 Instruction Manual download pdf (Page 27)

EVERFOCUS ELECTRONICS CORPORATION

Alarm Setting Menu

Diagram 8

Diagram eight is a screen shot of the Alarm Record Setting Menu. This menu contains

all the alarm operations and options needed to successfully complete an alarm

recording. In the Alarm Record Setting Menu the following fields are defined as:

¾ Operations: This field is to turn alarm recording on or off. The Default

from the factory is set to on. To change this, simply use the Jog Dial on

the DVR. Press the Enter key to make your selection.

¾ Alarm Types: These fields represent what to do when a signal is received

from the alarm board connector. There are two types of alarm signals. The

first is N.O. which stands for Normally Open circuit. The Second is N.C.

which stands for Normally Closed circuit. The default setting is N.O. This

option would be set according to the type of alarm input connected to the

alarm board. For example if you connected a door sensor which was a

Normally Open circuit you would set the alarm type to N.O. To change

this, simply use the Jog Dial on the DVR. Press the Enter key to make

your selection.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 111 112

No comments

EverFocus eDR400 Instruction Manual Page 27