EverFocus eDR400 Operations Instructions download pdf (Page 49)

Administrator’s Guide and Operating Instructions



Auto Pan – To enable Auto Pan function. Select the speed (high,

Medium or Low) from the above column by using the down

arrow button, then click on Auto Pan button to start. The

camera will run between the defined start and end position.

Click on Auto Pan button again to stop running.



Sequence – To enable Sequence Mode. In sequence Mode, the

camera will go to each preset position sequentially by the preset

dwelling time. Select the dwelling time (3-60sec) from the

above column by using the down arrow button, then click on

Seq button to start the Sequence Mode. Click on Seq button

again to stop.



Iris – To adjust the brightness level of the PTZ camera. Click

on Inc. to get brighter picture. Click on Dec. to get darker

picture.



Menu – For EverFocus ED2200 and SamSung SCC-641P

models use only. Please refer to the user manuals of the

above PTZ cameras for the detail information.



Enter –For EverFocus ED2200 and SamSung SCC-641P

models use only. Please refer to the user manuals of the

above PTZ cameras for the detail information.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 66 67

No comments

EverFocus eDR400 Operations Instructions Page 49