ENVR8304D / ENVR8304E ENVR8304D-8CH / ENVR8304E-8CH, Plug & Play NVR
ENVR8304D-8CH / ENVR8304E-8CH 1 1. Introduction EverFocus all new NVR Solution, targeting small-scale installations
ENVR8304D-8CH / ENVR8304E-8CH 91 6.4 Disk The Disk menu is used to review the NVR’s hard drive settings and status. No
ENVR8304D-8CH / ENVR8304E-8CH 92 6.4.2 Lock / Format Figure 6-35 Maximum Lock (%): Sets the maximum percentage of the
ENVR8304D-8CH / ENVR8304E-8CH 93 6.4.3 RAID The RAID function (Redundant Arrays of Independent Disks) can enable multi
ENVR8304D-8CH / ENVR8304E-8CH 94 The total capacity of a RAID 5 array is the size of the smallest disk times (N-
ENVR8304D-8CH / ENVR8304E-8CH 95 6.5 Display Setting You can configure the settings for displaying the camera / NVR in
ENVR8304D-8CH / ENVR8304E-8CH 96 6.5.2 M/T SEQ You can configure up to 20 steps of the sequencing order for the Main m
ENVR8304D-8CH / ENVR8304E-8CH 97 6.6 Network The NVR allows you to use a Web browser to remotely view and manage the s
ENVR8304D-8CH / ENVR8304E-8CH 98 Network Type: Three options are selectable: Static IP, DHCP and PPPoE. Static IP: User
ENVR8304D-8CH / ENVR8304E-8CH 99 network, for all four of the network setting fields: IP address, subnet mask, default
ENVR8304D-8CH / ENVR8304E-8CH 100 6.6.2 Email You can configure the Email settings for NVR to send Email alert when an
ENVR8304D-8CH / ENVR8304E-8CH 2 1.1 Overview ENVR8304D: Front View3.5" HDDMouse orUSB Memory StickIR Remote Contr
ENVR8304D-8CH / ENVR8304E-8CH 101 6.6.3 DDNS DDNS (Dynamic Domain Name System) is a service used to map a domain name
ENVR8304D-8CH / ENVR8304E-8CH 102 6.6.3.1 EverFocus DDNS Note that the DNS Server 1 (6.7.1 LAN) should be set up cor
ENVR8304D-8CH / ENVR8304E-8CH 103 6.6.3.2 www.dyndns.org Figure 6-44 DDNS Service: Select www.dyndns.org from the dro
ENVR8304D-8CH / ENVR8304E-8CH 104 6.6.4 FTP Set up the FTP server settings to enable the FTP function. The function is
ENVR8304D-8CH / ENVR8304E-8CH 105 6.6.5 Alarm Server You can send out the alarm notifications to EverFocus’s CMS softw
ENVR8304D-8CH / ENVR8304E-8CH 106 6.6.6 Network Test The Ping utility is useful in diagnosing connectivity problems by
ENVR8304D-8CH / ENVR8304E-8CH 107 6.7 Schedule You can set up the recording schedule with the desired time, event type
ENVR8304D-8CH / ENVR8304E-8CH 108 6.7.2 Holidays In addition to set up a weekly recording schedule, you can also set u
ENVR8304D-8CH / ENVR8304E-8CH 109 6.7.3 Schedule You can set up the camera recording mode by time of day on specific d
ENVR8304D-8CH / ENVR8304E-8CH 110 1. Select a camera first and double-click on desired start time block (no number on
ENVR8304D-8CH / ENVR8304E-8CH 3 ENVR8304E: Front View3.5" HDDMouse orUSB Memory StickIR Remote Control Rear ViewPo
ENVR8304D-8CH / ENVR8304E-8CH 111 Apply to Days: This button can be used to copy schedules to other days. Select which
ENVR8304D-8CH / ENVR8304E-8CH 112 6.8 System Setting You can configure the general settings for the NVR in this menu.
ENVR8304D-8CH / ENVR8304E-8CH 113 NTP Update Interval: The frequency that the system automatically updates the time via
ENVR8304D-8CH / ENVR8304E-8CH 114 6.8.2 Daylight Saving You can configure the settings for NVR to automatically adjust
ENVR8304D-8CH / ENVR8304E-8CH 115 6.8.3 User Group This setting page is used for configuring the privilege of the thr
ENVR8304D-8CH / ENVR8304E-8CH 116 6.8.4 User Management You can create multiple user accounts (max: 20 user accounts)
ENVR8304D-8CH / ENVR8304E-8CH 117 You can further configure each user account and its settings individually, see the st
ENVR8304D-8CH / ENVR8304E-8CH 118 Figure 6-59
ENVR8304D-8CH / ENVR8304E-8CH 119 6.8.5 I/O Control The I/O Control setup menu is used to define the settings for cont
ENVR8304D-8CH / ENVR8304E-8CH 120 RS-485 PTZ Protocol: Select PTZ protocol, choose from the following protocols: Transp
ENVR8304D-8CH / ENVR8304E-8CH 4 1.2 Features • 8-channel real-time recording and playback at 1080p resolution • Buil
ENVR8304D-8CH / ENVR8304E-8CH 121 6.8.6 EKB200 Setting You can connect an EKB200, which is EverFocus’ USB keyboard, to
ENVR8304D-8CH / ENVR8304E-8CH 122 【Key No】 The control key number on the keyboard. 【Action】 Select an item from the d
ENVR8304D-8CH / ENVR8304E-8CH 123 6.8.7 Miscellaneous You can upgrade the latest firmware, restore the factory default
ENVR8304D-8CH / ENVR8304E-8CH 124 Allowed Remote Reboot: Check the box to enable restarting the NVR via the Network. F
ENVR8304D-8CH / ENVR8304E-8CH 125 6.9 System Information You can see the NVR information and Log data in this menu. Or
ENVR8304D-8CH / ENVR8304E-8CH 126 【Lan】 IP 1 / IP 2: Displays the IP address of LAN 1 / LAN 2 set up in the Network or
ENVR8304D-8CH / ENVR8304E-8CH 127 6.9.2 Log You can choose, display or export log data using this menu.
ENVR8304D-8CH / ENVR8304E-8CH 128 7. Remote Access to the NVR You can access and control the NVR remotely by using the
ENVR8304D-8CH / ENVR8304E-8CH 129 4. When first connecting to the NVR’s IP address, the following dialog may appear. P
ENVR8304D-8CH / ENVR8304E-8CH 130 7.2 Install JAVA Runtime You need to install the latest JAVA software for stable o
ENVR8304D-8CH / ENVR8304E-8CH 5 1.3 Packing List • NVR x 1 • User Manual x 1 • CD x 1 (Please see Note 3.) • Mouse x
ENVR8304D-8CH / ENVR8304E-8CH 131 6. Scroll to “Check for certificate revocation using”, and select the Online Certifi
ENVR8304D-8CH / ENVR8304E-8CH 132 7.3 Browser Security Setting 7.3.1 Installing ActiveX Controls Follow the steps b
ENVR8304D-8CH / ENVR8304E-8CH 133 7.3.2 Enabling ActiveX Controls Note this section is only necessary if you DO NOT se
ENVR8304D-8CH / ENVR8304E-8CH 134 3. In the Security Settings window, scroll to “ActiveX controls and plug-ins”. Figu
ENVR8304D-8CH / ENVR8304E-8CH 135 6. Click the Refresh button to reload the page. Figure 7-15 7. You may need to run
ENVR8304D-8CH / ENVR8304E-8CH 136 7.4 Remote Live View When you access the NVR using web browser, the remote live view
ENVR8304D-8CH / ENVR8304E-8CH 137 No. Name Description 1 Menu Bar For configuring the NVR. 2 Layout Click a desired
ENVR8304D-8CH / ENVR8304E-8CH 138 Menu Bar: 12345678910111213 Figure 7-19 No
ENVR8304D-8CH / ENVR8304E-8CH 139 7.5 Camera 7.5.1 Camera Status Figure 7-20 【Camera List】 Channel: Displays the chan
ENVR8304D-8CH / ENVR8304E-8CH 140 7.5.2 Basic User can configure the detailed camera settings, PTZ and tracking functio
ENVR8304D-8CH / ENVR8304E-8CH 6 1.4 Optional Accessories • EKB200 (USB controller keyboard: connect to the PC or th
ENVR8304D-8CH / ENVR8304E-8CH 141 【Main / Sub Stream】You can separately configure the settings for the Main and Sub Str
ENVR8304D-8CH / ENVR8304E-8CH 142 7.5.2.2 PTZ You can set up the Preset, Auto Pan, Tracking, Pattern and Tour settings
ENVR8304D-8CH / ENVR8304E-8CH 143 Preset: Click the Preset button to set up the Preset Position or the Auto Pan functio
ENVR8304D-8CH / ENVR8304E-8CH 144 Auto Pan: You can only configure one Auto Pan sequence. The configured Auto Pan (A to
ENVR8304D-8CH / ENVR8304E-8CH 145 Tracking: Click the Tracking button to set up the tracking function which is function
ENVR8304D-8CH / ENVR8304E-8CH 146 Note: Please note that if enabling the Pan/Tilt Limits function, the position of the
ENVR8304D-8CH / ENVR8304E-8CH 147 Pattern Tour: Figure 7-28 Pattern: You are given 90 seconds to move the camera (vi
ENVR8304D-8CH / ENVR8304E-8CH 148 Tour: You can combine up to 16 preconfigured camera positions and patterns into one l
ENVR8304D-8CH / ENVR8304E-8CH 149 7.5.3 Video Adjust Figure 7-30 Channel Number: Select a channel to configure the f
ENVR8304D-8CH / ENVR8304E-8CH 150 Note: Whether the following functions marked with a “*” will be enabled or not depend
ENVR8304D-8CH / ENVR8304E-8CH 7 1.5 Front Panel ENVR8304D: 12 3 45876 ENVR8304E: 12345876 Figure 1-2 No. Name Descr
ENVR8304D-8CH / ENVR8304E-8CH 151 7.6 PTZ You can use the PTZ Control Panel to control the connected PTZ cameras, to s
ENVR8304D-8CH / ENVR8304E-8CH 152 7. To jump to a Preset Position: a. Click the Preset button. b. Click the desired
ENVR8304D-8CH / ENVR8304E-8CH 153 8. Specifications 8.1 ENVR8304D-8CH / ENVR8304D-8CH Model Name ENVR8304D-8CH / EN
ENVR8304D-8CH / ENVR8304E-8CH 154 Alarm Alarm Input / Output 2 / 2 Storage Internal 3.5” HDD 4 x SATA HDD (Max: 16 TB
ENVR8304D-8CH / ENVR8304E-8CH 155 8.2 NVR Smart Switch for ENVR8304D Name NVR Smart Switch Ports Number of Ports 10 po
ENVR8304D-8CH / ENVR8304E-8CH 156 Operating Humidity 10 to 90% RH (non-condensing) Storage Temperature -20°C ~ 90°C (-4
ENVR8304D-8CH / ENVR8304E-8CH 157 8.3 Embedded PoE of ENVR8304E Name PoE Ports Number of Ports 9 ports 8-port Fast Eth
ENVR8304D-8CH / ENVR8304E-8CH 158 IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.
ENVR8304D-8CH / ENVR8304E-8CH 159 Appendix A: Network Overview This chapter will give you a basic instruction on how to
ENVR8304D-8CH / ENVR8304E-8CH 160 Gateway Address Addressees are either local or remote. A gateway address is composed
ENVR8304D-8CH / ENVR8304E-8CH 8 1.6 Rear Panel ENVR8304D: 1 2856 79 10 11 12 13 151416 ENVR8304E: 1234856791011 1213
ENVR8304D-8CH / ENVR8304E-8CH 161 Pre-Installation Before beginning the installation, please answer the following quest
ENVR8304D-8CH / ENVR8304E-8CH 162 Pre-Installation EverFocus’ NVR can operate using one of three types of networking co
ENVR8304D-8CH / ENVR8304E-8CH 163 Appendix B: Linksys & D-Link Port Forwarding Typical Linksys Port Forwarding This
ENVR8304D-8CH / ENVR8304E-8CH 164 Click on the “Applications & Gaming” tab. Applications and Gaming allows you to
ENVR8304D-8CH / ENVR8304E-8CH 165 Typical D-Link Port Forwarding This section will cover a few simple configurations fo
ENVR8304D-8CH / ENVR8304E-8CH 166 Click Virtual Servers on the left to bring up the following screen. Virtual Servers
ENVR8304D-8CH / ENVR8304E-8CH 167 Appendix C: IR Remote Control The IR remote control is an accessory to enhance the co
EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei,
ENVR8304D-8CH / ENVR8304E-8CH 9 10 RS-485 Port Connects to the RS-485 device, such as EverFocus’ EKB-500 keyboard. Ple
ENVR8304D-8CH / ENVR8304E-8CH 10 2. Installation 2.1 Hard Disk Drive Installation 1. Make sure the NVR is power-of
EVERFOCUS ELECTRONICS CORPORATION ENVR8304D-8CH / ENVR8304E-8CH User’s Manual 1995-2014 EverFocus Electronics Corp www.everfocus.com Al
ENVR8304D-8CH / ENVR8304E-8CH 11 5. Connect the internal power cable to the HDD. Figure 2-4 Note: The internal po
ENVR8304D-8CH / ENVR8304E-8CH 12 2.1.1 Hard Disk Compatibility List Please use the hard disk models recommended in the
ENVR8304D-8CH / ENVR8304E-8CH 13 2.2 Rack Mount To install rack ears on the NVR, use the supplied two Rack Ears and th
ENVR8304D-8CH / ENVR8304E-8CH 14 2.3 Basic Connection The instructions below describe the basic connection for ENVR830
ENVR8304D-8CH / ENVR8304E-8CH 15 ENVR8304E: Power CordMain Monitor (HDMI)Main Monitor (VGA)Web Remote ClientPowerVideo
ENVR8304D-8CH / ENVR8304E-8CH 16 2.3.1 Camera Connection ENVR8304D: Connect the LAN Port to the Uplink port of the PoE
ENVR8304D-8CH / ENVR8304E-8CH 17 2.3.2 Cable Length Extension The Ethernet connection is effective within 100 meters i
ENVR8304D-8CH / ENVR8304E-8CH 18 ENVR8304E: HubHubHub100 M100 M100 MPoE InjectorThe camera requires separate power supp
ENVR8304D-8CH / ENVR8304E-8CH 19 2.3.4 Display Aspect Ratio It is recommended to select the same ratio of the screen r
ENVR8304D-8CH / ENVR8304E-8CH 20 2.3.5 Alarm I/O The NVR provides two alarm inputs and two alarm outputs. Please refer
ii Safety Precautions Refer all work related to the installation of this product to qualified service personnel or system installers. Do n
ENVR8304D-8CH / ENVR8304E-8CH 21 2.3.6 RS-485 Port The RS-485 port, located on the rear panel of the NVR, can be used
ENVR8304D-8CH / ENVR8304E-8CH 22 2.5 Connecting the NVR to the Network There are three methods to connect the NVR to t
ENVR8304D-8CH / ENVR8304E-8CH 23 Connection Procedure: The First step is to purchase or make a straight through cab
ENVR8304D-8CH / ENVR8304E-8CH 24 Take the values for Subnet Mask and Default Gateway and input them into the NVR; th
ENVR8304D-8CH / ENVR8304E-8CH 25 2.5.2 Direct High-Speed Connection In a Direct High-Speed Connection, the NVR connect
ENVR8304D-8CH / ENVR8304E-8CH 26 2.5.3 One-to-One Connection You can connect directly without using a switch, router o
ENVR8304D-8CH / ENVR8304E-8CH 27 Go to Start. Double-click on Control Panel. Figure 2-22 Click Network and Sha
ENVR8304D-8CH / ENVR8304E-8CH 28 Click Properties. Figure 2-25 Click on Internet Protocol Version 4(TCP/IPv4) a
ENVR8304D-8CH / ENVR8304E-8CH 29 Select Use the following IP address. Assign an IP address of 192.168.1.2, a Subnet
ENVR8304D-8CH / ENVR8304E-8CH 30 2.6 Checking the Dynamic IP Address You can look up the IP address and access the Web
iii Follow Instructions All operating and use instructions should be followed. Cleaning Unplug the unit from the outlet before cleaning. Do n
ENVR8304D-8CH / ENVR8304E-8CH 31 c. Right click the column to configure the setting. Click Apply Changes button to
ENVR8304D-8CH / ENVR8304E-8CH 32 6. You might be required to download ActiveX and JAVA software for viewing the camera
ENVR8304D-8CH / ENVR8304E-8CH 33 3. General Operation There are three ways to control the ENVR8304D-8CH / ENVR8304DE-8
ENVR8304D-8CH / ENVR8304E-8CH 34 3.2 Forget Your Password 1. If you forget your password, please email the Serial Num
ENVR8304D-8CH / ENVR8304E-8CH 35 3.4 Field Input Option You may found the following fields in the Configuration menu.
ENVR8304D-8CH / ENVR8304E-8CH 36 3.5 Camera Selection You can control each camera individually by selecting that camer
ENVR8304D-8CH / ENVR8304E-8CH 37 4. OSD Root Menu 123456789101112 Figure 4-1 No Name Description 1 Playback Click t
ENVR8304D-8CH / ENVR8304E-8CH 38 4 Channel Click to display the Channel Changing Bar as show below. To switch the sele
ENVR8304D-8CH / ENVR8304E-8CH 39 4.1 PTZ You can use the PTZ Control Panel to control the connected PTZ cameras. To br
ENVR8304D-8CH / ENVR8304E-8CH 40 9. To operate the Auto Pan function, click the Auto Pan button. 10. To operate the
iv This Product is RoHS compliant. Federal Communication Commission Interference Statement This equipment has
ENVR8304D-8CH / ENVR8304E-8CH 41 4.1.1 Express Control of PTZ If the PTZ Control Panel has first been opened and then
ENVR8304D-8CH / ENVR8304E-8CH 42 4.2 Layout Switching The NVR have 4 screen division types available. The seven layo
ENVR8304D-8CH / ENVR8304E-8CH 43 4.4 Display You can display system and camera status on the live view screen. Follow
ENVR8304D-8CH / ENVR8304E-8CH 44 4.5 Sequence The sequence function is used to display each channel in sequence mode
ENVR8304D-8CH / ENVR8304E-8CH 45 To enter the Zoom mode: 1. Select a camera and then click the Zoom button on the O
ENVR8304D-8CH / ENVR8304E-8CH 46 4.7 Archiving the Recordings or Log Data to the USB You can archive the recordings or
ENVR8304D-8CH / ENVR8304E-8CH 47 EFPlayer: Unzip the EFPlayer file and double-click to open it as below. The EFPlayer c
ENVR8304D-8CH / ENVR8304E-8CH 48 7 Playback Controls : Click to fast reverse / fast forward. : Click to reverse pl
ENVR8304D-8CH / ENVR8304E-8CH 49 4.8 Logout You can log out the NVR by clicking the Logout icon on the OSD Root Men
ENVR8304D-8CH / ENVR8304E-8CH 50 5. Search and Playback You can use the Quick Playback function to play back the recor
v TABLE OF CONTENTS 1. Introduction ...
ENVR8304D-8CH / ENVR8304E-8CH 51 5.2 Playback Bar The playback bar is the fastest way to show video from the exact tim
ENVR8304D-8CH / ENVR8304E-8CH 52 No. Name Description 10 Play/Pause Click to play the recorded data
ENVR8304D-8CH / ENVR8304E-8CH 53 5.3 Searching the Recordings for Playing Back You can search the recordings for playi
ENVR8304D-8CH / ENVR8304E-8CH 54 5.3.2 Event Search Figure 5-5 Start Date / End Date: Click to bring up the on-sc
ENVR8304D-8CH / ENVR8304E-8CH 55 5.3.3 Snapshot Search You can display video frames in snapshot and resume a vide
ENVR8304D-8CH / ENVR8304E-8CH 56 To resume the video: 1. Click the Search button, the search results are displayed in
ENVR8304D-8CH / ENVR8304E-8CH 57 6. Configuration The ENVR8304D-8CH and ENVR8304E-8CH can be configured through a seri
ENVR8304D-8CH / ENVR8304E-8CH 58 List of Configuration Options: Please find the topic of interest by referring to the
ENVR8304D-8CH / ENVR8304E-8CH 59 6.1 Camera If the NVR doesn’t detect any IP cameras, the Basic, PTZ, Tracking, Patt
ENVR8304D-8CH / ENVR8304E-8CH 60 6.1.2 Basic Figure 6-4 Channel Number: Select a desired channel for configuration. D
vi 4.2 Layout Switching ... 42 4.3 Channel
ENVR8304D-8CH / ENVR8304E-8CH 61 【Main / Sub Stream】You can separately configure the settings for the Main and Sub Stre
ENVR8304D-8CH / ENVR8304E-8CH 62 6.1.3 PTZ You can set up the Preset and Auto Pan settings in this page. Figure 6-5 【
ENVR8304D-8CH / ENVR8304E-8CH 63 Preset: You can configure up to 192 preset positions in this field. Figure 6-7 To se
ENVR8304D-8CH / ENVR8304E-8CH 64 Auto Pan: You can only configure one Auto Pan sequence. The configured Auto Pan (A to
ENVR8304D-8CH / ENVR8304E-8CH 65 6.1.4 Tracking Figure 6-9 To set up the Auto Tracking function: 1. Auto Tracking St
ENVR8304D-8CH / ENVR8304E-8CH 66 Note: Please note that if enabling the Pan/Tilt Limits function, the position of the S
ENVR8304D-8CH / ENVR8304E-8CH 67 6.1.5 Pattern Tour Figure 6-10 Pattern: You are given 90 seconds to move the camera
ENVR8304D-8CH / ENVR8304E-8CH 68 Tour: You can combine up to 16 preconfigured camera positions and patterns into one lo
ENVR8304D-8CH / ENVR8304E-8CH 69 6.1.6 Adjust Figure 6-12 Camera: Select a desired camera for adjusting the followi
ENVR8304D-8CH / ENVR8304E-8CH 70 * Flicker: Check the box to enable the Flicker function. Please enable this function o
vii 6.4.1 Disk ... 91 6.4.2 Lock
ENVR8304D-8CH / ENVR8304E-8CH 71 6.1.7 eZ Hopper You can just use one mouse to control up to 16 DVRs/NVRs in the same
ENVR8304D-8CH / ENVR8304E-8CH 72 2. The position of each device on the OSD layout represents the physical positions
ENVR8304D-8CH / ENVR8304E-8CH 73 For the Sub Server: 1. Select Sub Server in the Mode drop-down list, and check th
ENVR8304D-8CH / ENVR8304E-8CH 74 6.2 Record & Playback You can configure the basic recording settings on the hard
ENVR8304D-8CH / ENVR8304E-8CH 75 6.2.2 Quick Archive Figure 6-21 You can quickly archive all the recordings to the
ENVR8304D-8CH / ENVR8304E-8CH 76 6.2.3 Playback Figure 6-22 Quick Playback: Check the box to enable the configured pl
ENVR8304D-8CH / ENVR8304E-8CH 77 6.3 Event You can configure the Alarm, Connection Loss, Motion and Other settings in
ENVR8304D-8CH / ENVR8304E-8CH 78 the Alarm Server for the NVR to send network alarms to the client PC (see 6.6.5 Alarm
ENVR8304D-8CH / ENVR8304E-8CH 79 6.3.2 Connection Loss Figure 6-24 Camera: Select a camera to be configured. Enable
ENVR8304D-8CH / ENVR8304E-8CH 80 Output Type: Select an output type when an alarm is triggered. Timeout: Select this
viii 7.5.2.1 Camera ... 140 7.5.2.2 PTZ ...
ENVR8304D-8CH / ENVR8304E-8CH 81 6.3.3 Motion Figure 6-25 Camera: Select a camera to be configured. Enable: Check t
ENVR8304D-8CH / ENVR8304E-8CH 82 FTP Upload: Check the box to enable uploading recordings to the FTP server function. T
ENVR8304D-8CH / ENVR8304E-8CH 83 To Edit the Motion Grids: 1. Click the Edit Motion Grid button, the Motion Setting m
ENVR8304D-8CH / ENVR8304E-8CH 84 6.3.4 Other You can configure the event settings and enable the Buzzer or Email alert
ENVR8304D-8CH / ENVR8304E-8CH 85 6.3.4.2 Disk Temperature Figure 6-28 Log: Check the box to record alarm events to
ENVR8304D-8CH / ENVR8304E-8CH 86 6.3.4.3 Disk Failure Figure 6-29 Log: Check the box to record alarm events to log
ENVR8304D-8CH / ENVR8304E-8CH 87 6.3.4.4 Disk Full Figure 6-30 Log: Check the box to record alarm events to log dat
ENVR8304D-8CH / ENVR8304E-8CH 88 6.3.4.5 Disk Off Figure 6-31 Buzzer: The buzzer will activate when fan is not work
ENVR8304D-8CH / ENVR8304E-8CH 89 6.3.4.6 Power Loss Figure 6-32 Log: Check the box to record alarm events to log da
ENVR8304D-8CH / ENVR8304E-8CH 90 6.3.4.7 Network Loss Figure 6-33 Log: Check the box to record alarm events to log
Comments to this Manuals