EverFocus ECOR960 16F2 User Manual download pdf (Page 138)

ECOR960 4F2 / 8F2 / 16F2

129

 What type of DVR are you installing? ______________

The default ports are

ECOR264: 80

Paragon: 80

ECOR: 80, 1600

EDR/EDVR: 80, 1600, and 37260 – 37263

EMV: 80

TUTIS: 80

If the ports were changed in the Network Setup, use those port numbers.

Pre-Installation

Everfocus’ DVR can operate using one of three types of networking connections.

Simple One to One Connection: A simple one to one connection is the simplest type of network

connection. It uses a cross-over cable to make a direct connection from one computer to another

(or in this case a computer to a DVR).

Direct High Speed Modem Connection: A direct modem connection uses a standard network cable

to connect the modem directly to a computer (or in this case a modem to the DVR). This type of

connection only covers single-port modems. For a combination modem/router, use the setup

described below.

Router or LAN Connection – A local area network connection requires either a router or a

pre-existing LAN connection. This is the most common type of connection. A router allows

multiple computers and DVR’s to access each other as well as the Internet. It assigns different

internal IP addresses to the computers.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 148 149

No comments

EverFocus ECOR960 16F2 User Manual Page 138