EverFocus Eptz3000 User Manual download pdf (Page 36)

4-35

 Preset a position: Shift the Joystick to the position you would like to preset, and

then press Shift + Position. The system will ask you to enter the preset position

number (1~239), and then press Enter to save the position. There are up to 239

positions can be preset.

 Set the parameter of a preset position: Press Set + Position to set the parameter

of a preset position. You can set the going-to speed (1~239), dwell time (1~239

seconds), and the title of the position. Shift the joystick Right/Left to change bits,

and shift the Joystick Up/Down to change the alphanumeric characteristic. The

available alphanumeric characteristics are 0~9, A~Z, &, ?, !, :, ‘, ., ,, /, -, and a

space.

 Delete a preset position: Press Clr + Position to delete a preset position. The

system will ask you to enter the position number that you would like to delete, and

then press Enter.

4.4. Tour Mode

In the tour mode, you can set a tour for viewing. There are 16 tours can be set, and 16

preset positions in a tour.

 One-way tour Mode: Press Tour to enter the tour mode. The system will ask you

to enter the tour number you would like to run, and starts the tour after pressing

Enter. To preset a tour before running it is necessary.

Preset a one-way tour: Press Set + Tour to preset a one-way tour. The system will

ask you to enter preset position numbers (The positions need to be preset). After

finish entering all positions, press Stop to quit, and then press Enter to save the

tour.

1 2 ... 31 32 33 34 35 36 37 38 39

No comments

EverFocus Eptz3000 User Manual Page 36