EverFocus Eptz3000 User Manual download pdf (Page 14)

2-13

Video Cable

A BNC cable is used for connecting an EPTZ3000/EPTZ3000I to a DVR or a monitor.

An amplifier may be needed if the video cable is too long.

Control Cable

Basically, EPTZ3000/EPTZ3000I uses a differential pair to connect to other devices

by cascading. A cable that has low signal decline can be used as a control cable.

Alarm Cable

An alarm cable is not included in the packing list. A suitable wire that has low signal

decline can be used as an alarm cable.

2.3. Initial Setup

Initial setup includes dome address, communication protocol, transmission speed,

video format, and terminal resistance settings. All of the settings should be confirmed

before the dome is installed. The control-related setting that is address, communication

protocol and transmission speed have to be set consistently with the control device such

as a keyboard or a DVR.

Notice: Please make sure the power is off before setting, and restart the

EPTZ3000/EPTZ3000I to enable a new value after changing.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 38 39

No comments

EverFocus Eptz3000 User Manual Page 14