EverFocus ES2426-31 User Manual download pdf (Page 18)

ES2426-31

column as Enable or Disable.

 Addr. Learning: When the Auto-Negotiation column is set as Disable, users have to set this

column as Enable or Disable.

 Select Port No.: Tick the check boxes beside the port numbers being set.

 Click Update to have the configuration take effect.

 Current Status: Displays current port status.

 Setting Status: Displays current status.

Click Update to make the configuration effective.

5.2 Port Mirroring

The Port mirroring is a method for monitoring traffic in switched networks. That Traffic through

ports can be monitored by any of the ports means traffic goes in or out monitored (source) ports

will be duplicated into mirroring (destination) port.

Figure 3-2

 Destination (mirroring) port for monitoring Rx only, Tx only or both RX and TX traffic which

come from the source port. Users can connect the mirroring port to LAN analyzer or Netxray.

 Monitored Packets: Pull down the selection menu to choose what kind of packet is to be

monitored.

 Source Port: The ports that the user wants to monitor. All monitored port traffic will be copied

to mirroring (destination) port. Users can select multiple source ports by ticking the check

boxes beneath the port number label to be monitored.

And then, click Update to have the configuration take effect.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 38 39

No comments

EverFocus ES2426-31 User Manual Page 18