Everfocus EAN EDN850H User Manual

EDN850H User’s Manual Copyright © EverFocus Electronics Corp, Release: Dec. 2009 Rev.A

EDN850H 10○8 Snapshot The Snapshot button saves a snapshot of the video image currently being displayed. The location where the snapshot data is

EDN850H 11 4. SETTING Click this button to display the setup menu.

EDN850H 12 4.1 System Info System information and system log check of the setup menu can be performed on this page. The “System Info” p

EDN850H 13 4.1.2 Log System Log: Date/Time: displaying date and time of the log. Log message: all information and event message, inc

EDN850H 14 4.2 User Config Live view configuration is to be set by user. Each login user can make his/her own settings for the following

EDN850H 15 Position: Select the position where the text will be displaying from Upper Left / Lower Right / Lower Left. Press Apply to apply the

EDN850H 16Language: Select the language to be displayed in web page. Default language is English. To add a new language which is not listed in the

EDN850H 17• IP Type • IP address • Subnet mask • Gateway (when using the gateway server/router) • Primary DNS, Secondary DNS (when using DNS) • HT

EDN850H 18Primary DNS An IP address of DNS server that is provided by ISP. Secondary DNS If your ISP provides you an IP address secondary DNS, pl

EDN850H 19 DDNS setting When accessing the camera via the Internet from the network environment of which the global IP address is obtained using

EDN850H 2Product Name: EAN 850H EverFocus IP Network Cameras Model Number(s): EDN850H FCC Notice "Declaration of Conformity Information"

EDN850H 20 Press Apply to apply the setting changes or Reset to reset without saving the change. 4.3.3 Bandwidth Bandwidth Setting Max. Bandwidt

EDN850H 214.3.4 SMTP/FTP Set SMTP The settings relating to the mail server used to send the e-mail notification from the camera to predefined ad

EDN850H 22 Send Test Mail: Press button to send a testing mail to the assigned address. Set FTP The settings relating to the FTP server used t

EDN850H 234.3.5 Network Alarm (reserved for PowerCon) Set Network Alarm This function is reserved for PowerCon software, for the detail setting

EDN850H 244.4.1 Multi Streaming Stream Setting The system can output 4 video streams simultaneously. For each of them, user can set compression

EDN850H 25 Press Apply to apply the setting changes or Reset to reset without saving the change. Video Recording Setting User can set video r

EDN850H 26 OSD setting: Use the following buttons on the operation panel to operate the "Camera OSD setting" using a PC. (Please refer t

EDN850H 274.4.2.1 LENS 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “LENS” by using the UP and DOWN b

EDN850H 28 Ö ESC: (Reserved). Ö Manual: (Reserved) 2. Press SET button when you finish all the settings.

EDN850H 294.4.2.3 WHITE BALANCE Control The screen color can be adjusted by using the WHITE BALANCE function. 1. Please direct the arrow to point

EDN850H 3About this document All the safety and operating instructions should be read and followed before the unit is operated. This manual should

EDN850H 304.4.2.4 BACKLIGHT Even there is a massive backlight behind the object, bright images of the background and the object can still be obtai

EDN850H 314.4.2.6 DNR (Dynamic Noise Reduction) Dynamic Noise Reduction in video images has the following effects. 1. Images are brighter and sh

EDN850H 324.4.2.7 SENS-UP SENS UP is used to keep a brilliant, vivid screen image by automatically detecting changes in the level of light under

EDN850H 334.4.2.8 SPECIAL 1. Please direct the arrow to point to “SPECIAL” on the SETUP menu by using the UP and DOWN buttons. 2. Se

EDN850H 346) If you would like to cancel the ID inputted, please move the cursor to “CLR”, and all the letters inputted will be deleted. 7) Sele

EDN850H 354.4.2.8.3 SYNC There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, without a synchronous generator,

EDN850H 36z Please use the UP or DOWN button to move between TOP, DOWN, LEFT and RIGHT for adjusting the size of the area. z Please use the LEFT

EDN850H 373. Increase TOP scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45, LEFT: 20 and RIGHT: 40. 4. Increase RIGHT

EDN850H 38 z Please select the area you would like to cover from the 4 areas in AREA SEL mode. z Please select ON mode for the chosen a

EDN850H 391. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT: 40. 2. Increase DOWN scale value by 20. AREA1 pos

EDN850H 4 Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not use the appliance in an extreme

EDN850H 405. Increase LEFT scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45, LEFT: 40 and RIGHT: 60. z In order to sav

EDN850H 414.4.2.8.8 RESET Press the SET button on RESET for 3 seconds until it restarts. It will go to factory default value. 4.4.2.8.9

EDN850H 42 4.5 Audio The EDN850H camera can transmit audio to other clients using a built-in microphone or connecting to external microphone to pl

EDN850H 434.6 USER User Information Maximum 10 users can be set for using the IP camera. The user information displays the authorized users and

EDN850H 444.7 EVENT An event in the camera is when an Event Type is activated and causes certain actions to be performed. The event type is the se

EDN850H 454.7.1 Event The settings relating to event occurrences such as settings for the event occurrence, motion, alarm and time mask can be con

EDN850H 46To change the priority of events, click on the event and it will be highlighted. Press or button to move between events. The event t

EDN850H 475. Check “Enable Pre-alarm Buffer” and “Enable Post-alarm Buffer”. For pre-and post alarm buffer setting, please refer to “4.7.3 Alarm”.

EDN850H 48 There are 5 motion trigger areas, which can be distinguished by 5 different colors. Check Enable checkbox to enable event action. For e

EDN850H 49preceding the trigger. Input the desired length of pre-trigger buffer time. It can be set up to 120 seconds. Post-Alarm Buffer: Image sa

EDN850H 5External Dimensions: 56 mm x 68 mm x 101 mm / 2.24” x 2.72” x 4.04” TABLE OF CONTENTS 1. INTRODUCTION...

EDN850H 50Press button to add new time period. Mask name: Input a mask name for the new time period. Check the check box for the day to be sche

EDN850H 514.8 SYSTEM Date/Time, Daylight Saving, SD card and Maintenance settings can be performed on this page. The "System" page has 4

EDN850H 52previous month, > to go next month and >> to go next year. Time: Click on Hour, Minute, Seconds, am/pm; then use up arrow t

EDN850H 534.8.2 Daylight Saving Set Daylight Saving Check Enable Daylight Saving checkbox to enable daylight saving. Set the start time to da

EDN850H 54Press Apply to apply the setting changes or Reset to reset without saving the change. 4.8.3 SD Card Setup SD Card Notification: Not

EDN850H 55Normal: Follow the event actions settings you have made in “Event” menu to record event video to SD card. Overwrite: Select ON for overw

EDN850H 564.8.4 Maintenance Maintenance Server Reboot: The unit is rebooted without changing any of the settings. Use this method by pressing Re

EDN850H 57the Load button. The settings will be restored to the previous configuration. Upgrade Firmware Upgrade the EDN850H with the latest fir

EDN850H 585. SPECIFICATIONS CAMERA Pickup Device 1/3" Sony Super HAD Interlaced CCD Picture Elements NTSC: 768 (H) x 494 (V); PAL: 752 (H)

EDN850H 59PHYSICAL Weight 0.74 kg / 1.6 lbs Dimensions 123mm (O.D.) x 107.8mm (H) ; 4.8” (O.D.) x 4.2” (H) ENVIRONMENTAL Operating Temp. -1

EDN850H 64.8 SYSTEM...51 4.8.1 Date/Time.

EDN850H 60 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan TEL: 886-2-26982334 FAX: 886-2-26

EDN850H 71. INTRODUCTION The EDN850H is weatherproof IP66 rated outdoor network dome camera which provides H.264, MPEG-4 and MJPEG compression fo

EDN850H 83. ACCESSING THE CAMERA MENU Step 1.Start an Internet Explorer browser. Step 2. Enter the IP address or host name of the camera in the Lo

EDN850H 9 ○3 Press button to close EDN850H network page. ○4 Video Stream Select Video Stream from Stream 1 / Stream 2, Stream 3 and Stre