EverFocus EPTZ3100 User Manual download pdf (Page 38)

4-37

not tilt.

4.3. Position Setting

¾ Focus on a preset position: Press the number key, and then press Position to

focus on the number of preset position; or you can press Position, then enter the

preset position number, and then press Enter to focus on the number of preset

position.

¾ Preset a position: Shift the Joystick to the position you would like to preset, and

then press Shift + Position. The system will ask you to enter the preset position

number (1~192), and then press Enter to save the position. There are up to 192

positions can be preset.

Three specific preset positions can be set as follows:

92 => Set Left Limit Stop (A position)

93 => Set Right Limit Stop (B position)

95 => Enter Menu mode (Use keyboard control keys to control OSD items; Focus F.

to go downward, Focus N. to go upward. IRIS + go to previous setting and IRIS –

to exit).

You can directly go to the following specific preset positions:

33 => Rotation of 180 degree

34 => Go to Home position (if Home Position is set by EVF Keyboard)

96 => Stop Scan

97 => Start running tour

98 => Frame scan (60 degree / step)

Default speed is 32. It can be changed by EVF Keyboard (Shift + A.Pan setting

speed.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43

No comments

EverFocus EPTZ3100 User Manual Page 38