EverFocus EDSR400H Instruction Manual Page 1

INSTRUCTION MANUALV1.05 2004/3/25EDSR-4004 Channel Duplex Digital Video RecorderEDSR-6006 Channel Duplex Digital Video Recorder

System Connection53. System ConnectionThe installations described below should be made by qualified service personnel or system installers.Before Inst

Front Panel Keypads4. Front Panel KeypadsSHUTTLE : In Playback mode, turn the shuttle ring to fastforward/rewind the picture (600X maximum).In Pause

LEDs: LEDs for HDD1, HDD2 , ALARM and LAN access (from left to right).IR Remote Controller receiver7Display: Press this key to switch ON/OFF for camer

Operation8(1) Insert a HDD (IDE) for Video Storage (2) Connect cable for video/audio input and video/audio out, The detail connection is describe

MENU flow6. MENU FLOWCLOCK( See page 11 ): 2004/2/27 FRI: 13:01:02CLOCK SETTING MENUDATE TIME MENU LANGUAGE: ENGLISHVIDEO SYSTEM: NTSC

BUZZER ( See page 22 )BUZZER SETTING MENU BUZZER : ENABLERECORD-IN : ONALARM-IN : ONMOTION-IN : ONDISK FULL : ONVIDEO LOSS: ONTIMER

MENU11In CLOCK/LANGUAGE SETTING MENU , we define:(1) DATE : Current date, format: YYYY/MM/DDYear: 2000 ~ 2099, Month: 01~ 12, Date: 01~31, Week: Sun

MENU6.2 TIMER SETTING MENU12Timer records can be defined for 12 individual start and end times.(1) WEEK: This select the week day for the timer to rec

MENU(1) CH (Channel): Input channels 1~4 for EDSR400, 1~6 for EDSR600.(2) OP (Operation): ON includes the camera in the sequence, OFF skips the cam

MENU146.4 TITLE SETTING MENUIn TITLE SETTING MENU , we define:The Title Setting Menu allows you to assign a title to each camera input.Title with up

? Refer all work related to the installation of this product to qualified service personnel or system installers.? Do not block the ventilation openin

6.5 COVERT SETTING MENUCOVERT SETTING MENUCH OP1 OFF2 OFF3 OFF4 OFF(5 OFF)(6 OFF)In COVERT SETTING MENU , we define:T

In ALARM RECORDING MENU, we define (1) CH (Alarm input) : Select alarm input or RST for alarm reset input.(2) OP (OPERATION) : ON : Records when alar

MENU(1) CH (Channel) : Video input channel(2) OP (Operation) : Default: OFFON: The device will respond recording when motion occurs.OFF: The device wi

MENU(5) Press 1-4/6 TO MANUAL EDIT:Use the numeric keys (1~4 for EDSR-400 / 1~6 for EDSR-600) to select a camera for setting the detection areas.The s

MENU19In NORMAL RECORDING MENU, we define(1) NORMAL RECORD:SPEED : To set the normal recording speed. Maximum 60 (NTSC) / 50 (PAL).QUALITY: Video reco

6.9 NETWORK SETTING MENUIP ADDRESSNET MASK ADDRESSGATEWAY ADDRESSMAC ADDRESSUSER-NAME PASSWORD LEVEL NETWORK SETTING ME

MENU(1) RS232 BAUD RATE: There are 6 different speeds that can be used to transmit instruction or information through the RS232 port on the device, 12

In BUZZER SETTING MENU, we define the buzzerON/OFF for following event:RECORD-IN, ALARM-IN, MOTION-IN, DISK FULL, VIDEO LOSS AND TIMERMENU226.11 BUZ

MENU6.12 ARCHIVE SETTING MENU(1) PICTURE SIZE :Selects picture size for copying image to CF card:Big size:720x480 / 720x576 for NTSC / PAL.Small size:

6.13 CALL MONITOR SETTING MENU24CH DWELL EVENT00 07 SECS NONE00 07 SECS NONE00 07 SECS NONE00 07 SECS NON

The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance(servicing)instru

MENU256.14 DISK SETTING MENU(1) DISK USAGE: HDD-1, HDD-2(2) SIZE: Applied HDD size. (3) RECORD POS:HDD usage rate, record position, “*”show

MENU266.15 SYSTEM SETTING MENU(1) PLAY WITH AUDIO: AUDIO-1, AUDIO-2ON/OFF: Play back with or without audio.(2) PLAY SPEED: Set the playback speed. Max

7.1 INSTANT RECORDINGPress REC key to start continuous recording with setting of “NORMAL RECORD”. The recording rate and recording quality are set in

8.1 NORMAL PLAYBACKPress the PLAY key to start playing back the stored image/audio from the last SEGMENT. (1) Playback(2) Fast Forward/Reverse Playba

8.2 SEARCH PLAYBACKPress SEARCH key to enter the SEARCH MENU dialog.Search PlaybackSEARCH29SEGMENT SEARCH0001 000200032003/04/24 19/03/29

(2) Alarm List search playback30A01 : Alarm recording by Alarm-in 1. M03: Motion recording by camera 3. T : Timer recording.PL: automatic record resta

(3) Date/Time Search PlaybackDATE/TIME SEARCHYEAR/MM/DD HH:MM:SS HDD2003 /01 /01 21: 33: 26 1PRESS SEARCH TO START SEARCHPRESS MENU TO EXI

DATA EXPORTInsert a Compact Flash card into the Compact Flash slot on the front panel of DVR.When inserting the Compact Flash card, make sure that ins

COPYPress COPY key and then the copy menu and instruction appears.The main monitor switches to full screen display with following OSD:33Press the PLAY

9.3 EXPORT EVENT LOG LISTDATA EXPORTThis function allows to export the event log list to CompactFlash – Card.The generated text file is in *.txt forma

Important SafeguardsRead Instruction---All the safety and operating instructions should be read before the init is operatedRetain Instructions---The s

MONITOR VIEWS / OPERATION10. MONITOR VIEWS / OPERATION10.1. MAIN MONITORThe EDSR400/EDSR600 digital recorders provide 1 main monitor and 1call monit

Press CALL to change settings for CALL monitor. The Main monitor shows following dialogue:MONITOR VIEWS / OPERATION10.2. CALL MONITORS36CALLSETTING C

RJ45 (RS485) pin assignment11. REMOTE CONTROL11.1 RS-485 REMOTE CONTROLThe new standard EverFocus EDSR remote protocol allows challenging installation

IR Remote ControllerThe remote controller (RC-200, Figure 1) is an accessory to enhance the handy operations of the DVR. You can perform all the sett

12. View From Internet/IntranetBasic Operations and Login Display:Go to the Internet Explorer, key in the network IP address, for example,http://192.1

Main ScreenAbove diagram is the main screen display.The icons on the lower corner of the screen are mainly for control and Configuration, those on the

10. The system allows up to 3 ways playback video, by SEGMENT, ALARM LIST and DATE TIME.(Playback by SEGMENT LIST, click Refresh to show list)(Playba

11. All available segments are shown in the list. Click to select and highlight. 12. Click to playback selected video segment.13. Press this icon to s

Appendix-ALAN Functional SpecificationSpecifications:Network Interface: 10Mbits/s Ethernet (10Base T)LAN controller Chip:

Appendix-B ? When Recording with 160GB HDD44Lower Low Basic StandardHighSuperior: 15 kB: 19 kB: 23 kB: 27 kB: 31 kB: 35 kB(Estimated with typical i

Table of Contents1. Product Overview…………………………………….………………..… ..… ..Page 11.1 Main features…………………………………………………………………...… ..… .11.2 Specifications…………

? When Recording with 320GB HDDLower Low Basic StandardHighSuperior: 15 kB: 19 kB: 23 kB: 27 kB: 31 kB: 35 kBAppendix-B 45(Estimated with typical

Appendix C: Serial Interface Specifications2. Transmission settingPIN # NAME PIN # NAME1 NOT CONNECTED 1 NOT CONNECTED2

3. Remote Control ProtocolA computer or a terminal can be used to control the unit by sending the packet as following.471-1. Sample control code packe

482-1. The format of message packet is as follows:Length Byte (Prefix: 0x86, 0x87, or 0x88 ... )Receiver ID high byteReceiver ID low byteOpcode Byt

492-3. Receiver ID2-3. Receiver ID1). Individual receiver IDDecimal 14bit binary value Hbyte Lbyte Receiver ID (EDSR)0 0000000 0000000 00 00 ID = 01 0

502-4. Opcode Byte & Data bytes2-4-1. OPcodeOPcode Data1 Function0x4B Keycode A remote key pressed0x4D command Matrix command 2-4-2. Remo

Appendix-D51Alarm I/O pin assignmentThe alarm connector, Figure 1, is used to provide one sensor alarm input for each camera input.For easy operation,

EverFocus Electronics Corp.Head Office:12F, No.79 Sec. 1 Shin-Tai Wu Road,Hsi-Chi, Taipei, TaiwanTEL : +886-2-26982334FAX : +886-2-26982380www.everfoc

1. Product OverviewThe EDSR400/EDSR600 Duplex Digital Video Recorder (DVR) a full-featured DVR designed specifically for use in security industry. Th

Specifications21.2 Specifications4 (EDSR400) / 6 (EDSR600) camera inputs (BNC),1Vp-p/75ohm430mm (W) x 88mm (H) x 300 (D) DimensionAC100~240VPower Sour

Back Panel Connections2. Back Panel Connections1ON/OFF: Main on/off switch.2AC100~240V power socket. 3VIDEO IN: BNC-sockets for composite signal

410ALM-OUTPUT : Two-way contact relay alarm output. In normal condition, this N.C. contact shorted to ALM-COM. In alarm status, it is open between AL