EverFocus eDR400 Service Manual download pdf (Page 4)

EverFocus Electronics

Safety warning

Danger of electricity

• PowerCon Station and connected devices (e.g. monitor) are supposed to be installed

only within suitable power nets. Make sure that the power selection switch on the

device’s rear panel is set correctly.

• In case of a defect, separate the device from the power net and/or all further devices

• Make sure that only qualified technical personnel (electrical engineers) carry out the

devices’ installation and maintenance.

• PowerCon Station needs to be installed in a dry, weather-protected environment.

• If the PowerCon Station’s secure operation isn’t guaranteed, the device needs to be set

off duty and secured against unintended operation.

A secure operation isn’t granted anymore if:

• the device itself or any of the cables are obviously damaged

• the device doesn’t operate accurately

• the device has been exposed to rain or humidity

• any objects have penetrated the device

• the device has been stored within unsuitable surroundings for too long

• the device has been transported under inappropriate conditions.

In all mentioned cases, PowerCon Station needs to be checked by EverFocus

Electronics (Europe) GmbH.

Installation and operation

• All installation procedures described in this manual must be carried out only by

qualified personnel in compliance with the relevant electro technical guidelines.

• When installing PowerCon Station, the further connected devices’ – e.g. external drives

or monitors – documentations containing important safety warnings and information

about recommended applications also have to be considered.

• To avoid personal injury and damages of all kind, only the operations described in this

manual may be followed.

Repair and maintenance

• Never open the PowerCon Station housing. The device doesn’t contain any parts that

can be repaired or exchanged by the user.

• Make sure that only qualified personnel (electrical engineers) are involved in the

PowerCon Station maintenance and repair tasks.

1 2 3 4 5 6 7 8 9 ... 17 18

No comments

EverFocus eDR400 Service Manual Page 4