Everfocus EDSR400H User Manual download pdf (Page 38)

EVERFOCUS ELECTRONICS CORPORATION

¾ RS232/RS485 ID: This entry is used to assign each device its own ID code

if more than one unit is used through the RS232/RS485 connection.

There are two ID codes for the DVR: 001 or 002. The default is set to

001. To change this, simply use the arrow keys on the DVR which also

represent the channel 1-4 keys (These are the top four buttons). Use the

up and down arrow keys to make your selection.

: Press or to move the cursor to the left or right.

: Press or to change the value.

These keys are located at the top left row of keys (same keys

as channel 1-4).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 106 107

No comments

Everfocus EDSR400H User Manual Page 38